Iron gate repair houston
Recent Job Requests for Repair or Weld a Wrought Iron Fence Contractors in Houston, Texas:
Project Location: Houston, TX 77004
Request Stage: Ready to Hire
Desired Completion Date: Within 1 week
What kind of location is this?: Home/Residence
Historical Work: No
Property Owner: Yes
Comment: Need to install a 2 by 2 wrought iron post. Just one. Nothing is attached to it. The one its replacing was cut to the concrete by accident. So, the cut one needs to be removed and replace by new one, OR an adapter used and welded to the original.
Project Location: Houston, TX 77024
Fence height: 6-8 feet
Desired Completion Date: Timing is flexible
Project Location: Houston, TX 77095
Kind of Repair Needed: Post is damaged, Post is wobbly, Fence is damaged, Fence is rusty, Fence is loose, Hardware is damaged/broken/missing
Fence height: 4-6 feet
Comment: I would like to walk the iron fence with you to plan the repairs, replacement, and changes together.
Kind of Repair Needed: Post is damaged, Post is wobbly, Fence is damaged, Fence is rusty, Fence is loose, Gate is sagging, Hardware is damaged/broken/missing
Request Stage: Planning & Budgeting
Project Location: Houston, TX 77019
Comment: I need a price for a metal gate to be bolted down and realign it.
Date: 07/2017
Kind of Repair Needed: Fence is rusty, Hardware is damaged/broken/missing, Other
What kind of location is this?: Business
Comment: we are needing our entry and exit wrought iron gates repainted along with a few other small areas. We are also needing some welding done on our walk-thru gate and a spring replaced so that the iron door springs closed properly.
Project Location: Houston, TX 77057
Nature of Project: Repair existing fence
Fencing material: Wrought Iron
Length of Fence: Less than 100 feet
Comment: I have a gate that the hinge rusted off. Multiple gates that don't line up. Decorative pieces on two gates that are rust out. Two more gates that the slide latches are completely rusted away. I also need some post tops that stop the water from getting into the fence posts. 2 1/2" posts.
Project Location: Houston, TX 77089
Kind of Repair Needed: Hardware is damaged/broken/missing
Project Location: Houston, TX 77003
Kind of Repair Needed: Fence is damaged, Fence is loose, Gate is sagging
Fence height: Greater than 8 feet
Project Location: Houston, TX 77025
Kind of Repair Needed: Other
Fence height: Less than 4 feet
Project Location: Houston, TX 77096
Comment: The latch on our iron side gate keeps snapping. We have had the piece welded back together but it broke at the same location fairly soon after.
Desired Completion Date: 1 - 2 weeks
Comment: Repair or Weld a Wrought Iron Fence - For Business
Kind of Repair Needed: Gate is sagging, Other
Project Location: Houston, TX 77069
Kind of Repair Needed: Post is damaged
Comment: I have metal gates between the driveway and the porte a cohere that leads to the back yard and garage, One of the posts has rusted at the base and the weld has broken. The post is approx 3 to 4 inches square . It needs repair. I can send a photo of the damage if needed.
